上海奇克氟硅材料有限公司
Shanghai Chic New Material Co., Ltd.

Chic PU 3325Polyether antioxidant

  • Product Details
  • Product Specification
    Chic PU3325

    Product introduction: Chic PU3325 is 100% active liquid compound antioxidant with remarkalbe improvement in terms of anti-scorch and anti-yellowing performance during the process of foaming as well as good thermostability to the down-stream PU product . It is environment-friendly without volatile BHT antioxidant and suiting for manufacturing for polyether and polyester flexible foam. Meanwhile it has higher initial oxidated temperature and thermostability than antioxidant 1135.   

    Physical properties

    appearance

    Yellow or light amber viscous liquid

    dentisty (20°C) g/cm 3

    0.95-1.1

    viscosity (20°C)  cp

    5000

    Volatile %

    0.5

        
    Advantage:
    Excellent anti-oxidated property ,flowability,low volatile and good compatible properties
    Resist fogging in the surface of products equipped in the vehicle and coloring in the textile such as furniture and blanket
    Meet the need of voc and volatile.
    Suiting for the process of simple liquid,latex,suspension liquid,solution and melt polymer Good antihydrolysis in the room and high temperature.
    Added in the polymerization or after polymerization

    Application suggestion:
    Proposed dosage about 0.15%-0.5% and maximum dosage 1%.
    Pumped or injected product can be mixed well.
    Easily be emulsified ,desolved ,dispersed or maitain liquid state
                           
    Package: net weight 180kg/drum    
    Store and transportation: store in the dry ,ventilated and sunless storage , use out once open it ASAP and closed .
    Quality guarantee period: above 2 years
    Pay attention to the leak during the transportation and obey the process operation while carrying it in order to avoid the environment pollution


    Remark: This data mentioned the technical properties is for reference to the professional and is not the promise of the effect for the use . need do the feasibility test while changing the new product or new process in order to gain optimum

    Product Specification
    Chic PU3325

    Product introduction: Chic PU3325 is 100% active liquid compound antioxidant with remarkalbe improvement in terms of anti-scorch and anti-yellowing performance during the process of foaming as well as good thermostability to the down-stream PU product . It is environment-friendly without volatile BHT antioxidant and suiting for manufacturing for polyether and polyester flexible foam. Meanwhile it has higher initial oxidated temperature and thermostability than antioxidant 1135.   

    Physical properties

    appearance

    Yellow or light amber viscous liquid

    dentisty (20°C) g/cm 3

    0.95-1.1

    viscosity (20°C)  cp

    5000

    Volatile %

    0.5

        
    Advantage:
    Excellent anti-oxidated property ,flowability,low volatile and good compatible properties
    Resist fogging in the surface of products equipped in the vehicle and coloring in the textile such as furniture and blanket
    Meet the need of voc and volatile.
    Suiting for the process of simple liquid,latex,suspension liquid,solution and melt polymer Good antihydrolysis in the room and high temperature.
    Added in the polymerization or after polymerization

    Application suggestion:
    Proposed dosage about 0.15%-0.5% and maximum dosage 1%.
    Pumped or injected product can be mixed well.
    Easily be emulsified ,desolved ,dispersed or maitain liquid state
                           
    Package: net weight 180kg/drum    
    Store and transportation: store in the dry ,ventilated and sunless storage , use out once open it ASAP and closed .
    Quality guarantee period: above 2 years
    Pay attention to the leak during the transportation and obey the process operation while carrying it in order to avoid the environment pollution


    Remark: This data mentioned the technical properties is for reference to the professional and is not the promise of the effect for the use . need do the feasibility test while changing the new product or new process in order to gain optimum